Wireless Expansion Module
Features
RTX3
Analog Single-Optic PIR
(18kg/40lb Pet Immunity)
Features
PMD1
Outdoor Digital Dual-Optic High-Performance PIR
(40kg/90lb True Pet Immunity)
Features
PMD85
Heavy duty Outdoor Swivel Bracket
Features
SB85
2-Zone Wireless Door Contact
Features
DCTXP2
MAGELLAN 2-Way Wireless PGM
Features
2WPGM
MAGELLAN 2-Way Remote Control with Backlit Buttons
Features
REM2
MAGELLAN Remote Control with Backlit Buttons
Features
REM1
StayD Mode
Built-in transceiver (433MHz or 868MHz)
32 zones (any of which can be wireless)
32 users and 32 remote controls (one per user)
2 partitions
4-wire communication bus (connect up to 15 keypads)
Supports REM3 hand-held remote keypad
Supports up to 8 K32RF / K37 wireless keypads
Supports up to 2 RPT1 wireless repeaters
Supports PCS Series
Supports IP100 Internet Module
Supports VDMP3 Plug-in voice dialer
Supports 16 PGMs (any of which can be wireless)
Supports iParadox app
In-field firmware upgrade via 307USB and WinLoad
Menu-driven programming for the Installer, Master and Maintenance codes
Multiple telephone numbers for event reporting: 3 monitoring, 5 for Personal Dialing and 1 for pager
Patented 2 opto coupler dialer circuit - the most reliable dialer in the industry (US Patents 5751803, RE39406)
Calendar with Daylight savings Time
New Sleep arming method
Push button power reset
RF Jamming Supervision
9.6k baud communication with WinLoad
256 events buffered
Supports Memory Key (PMC5)
Fits in a 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) metal box or in a 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal box
MG5050
| Features | |
|
|
Compatible with MG5000, MG5050, MG6250, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher) |
|
|
Supports StayD |
|
|
System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system. |
|
|
Configure which partitions the REM3 arms/disarms |
|
|
Built-In Transceiver (433MHz or 868MHz) |
|
|
Independent Arm, Sleep, Stay and Off buttons and LED display per partition |
|
|
Control up to 6 PGMs and/or generate panics |
|
|
Keypad Mode: Requires code entry Remote Mode: One-touch arming / Disarming |
|
|
Installer Diagnostic Mode: Partition 1 LEDs = Signal Strength Display Partition 2 LEDs = RF Interference Display |
|
|
Provides visual and auditory feedback of system status |
|
|
Press the Status button to receive system status |
|
|
Label to identify remote control owner |
|
|
Compact, water-resistant design |
|
|
Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in) |
REM3
Features
REM101
Features
2-zone capabilities where each zone is independent and has its own serial number
Zone 1 - One of two high-sensitivity reed switches (magnet included)
Zone 2 - Universal transmitter input (N.O./N.C.)
Wireless range in a typical residential environment:
- 35m (115ft) with MG6160, MG6130, and MG6250;
- 70m (230ft) with MG5000, MG5050 and RTX3
Low battery and signal transmission LED
Available in 433MHz or 868MHz
Anti-tamper switch
Dimensions: 12.4cm x 4.5cm x 3.3cm (4.9in x 1.8in x 1.3in)
DCT10
| Features | |
|
|
Dual side anti-masking detection - Active IR detection, fast 20 seconds detection designed for outdoor detecting sprayed liquids and blocking items up to 25 cm (10 in.) |
|
|
Pet Immunity capability, up to 40 kg (90 lb) |
|
|
4 dual element sensors arrangement |
|
|
High efficiency long focal point (1.77 in.) LoDiff lens |
|
|
Combination optics - mirror and Fresnel Lens for optimal sharp detection |
|
|
Wireless frequency selection NV780MR support two internally selectable frequencies |
|
|
Single or Dual operation modes |
|
|
Optical and digital range adjustments |
|
|
Dual LED and buzzer indicators |
|
|
Wall-mount, with built-in level tool |
NV780MR
| Features | |
|
|
Pet Immune detection |
|
|
Anti-masking - Active IR detection for sprayed liquids and blocking items up to 30 cm |
|
|
Integrated creep zone detection |
|
|
Dual detectors controlled by Full Authority Digital Electronics Control (FADEC) |
|
|
Optical pet discrimination geometry to support Super Pet Immunity |
|
|
Dual tamper detection |
|
|
433 or 868 MHz |
|
|
EN 50131-2-2 Grade 2 |
NV35MR
| Features | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NV75MR
| Features | |
|
|
Three-axis (X, Y, and Z axis) accelerometer detection |
|
|
Adjustable sensitivity for any installation (additional grace period of up to four seconds can be added): -Short movement (High-security) = 1 to 3-seconds -Long movement (Standard-security) = 3 to 5-seconds |
|
|
Long battery life (2 years with two detections per week) |
|
|
Low battery and RF supervision |
|
|
Available in 433 MHz or 868 MHz |
|
|
Dual-tamper detection for removal or opening of the device |
|
|
Power saving mode (conserves battery life) |
GS250
| Features | |
|
|
Modern & sleek design |
|
|
Supervised wireless detector offered in 433 MHz and 868 MHz |
|
|
Six meter (20 ft.) radius range and 360º coverage pattern protects an entire room with one sensor |
|
|
Detect breaking of different types of glass including plate, tampered, laminated and wired |
|
|
Standard Alkaline 3x AAA type battery with low battery supervision |
|
|
Factory-set sensitivity for safer installation |
|
|
Recognizes actual pattern of breaking glass across the full audio band |
|
|
Impact and shock wave analysis |
|
|
High-immunity to RFI and EMI signals |
|
|
Hand-held tester available separately |
G550
Features
Compatible with MG Series V4.0 (except SP4000) and SP series V4.0 when using an RTX3 V1.5
Built-in transceiver (433MHz or 868MHz)
100db wireless siren with integrated strobe light
Weather-resistant design using a PC/ABS enclosure with UV protection (-20°C to 50°C / -4°F to 122°F)
Battery powered only, no need for AC power
Wireless range in a typical residential environment:
- 35m (115ft) with MG6160, MG6130, and MG6250;
- 70m (230ft) with MG5000, MG5050 and RTX3
Fast alarm response time (4 seconds)
2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off)
Siren presence supervised by control panel
Dual tamper protection (cover removal, and removal from wall)
Assign up to 4 sirens per control panel
In-field firmware upgradeable via 307USB
Siren test mode
4-LED signal strength and status display
Strobe lens available in 4 colours (red, blue, amber, and clear)
Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply.
Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in)
SR150
| Features | |
|
|
Compatible with MG6250, MG5000/MG5050 V3.22, Spectra SP V3.22 (except SP4000) and RTX3 V1.42 |
|
|
Powered by 2 "AA" batteries, with built-in backup battery (PA6 is optional) |
|
|
A 6Vdc power adaptor (PA6 not included) is not required but can be used as an alternative power source |
|
|
Provides real-time zone and system status, and can be used to program the panel using only battery power (2 "AA" alkaline batteries) |
|
|
Goes into sleep mode after 20 seconds to save battery life, but remains synchronized with the panel in order to automatically wake up upon an entry delay or an alarm to provide full functionality (system status, zone display and buzzer) |
|
|
Fixed message display that guides you in the operation of the system |
|
|
Displays the status of 32 zones in 2 partitions |
|
|
Displays Arm, Sleep, Stay and Disarmed status for each partition |
|
|
Displays StayD, troubles, bypassed zones and alarm memory |
|
|
In-field firmware upgrade via 307USB and WinLoad |
|
|
Adjustable backlight |
|
|
Built-in transceiver (433MHz or 868MHz) |
|
|
Wireless range in a typical residential environment: 40m (130ft) |
|
|
8 one-touch action buttons |
|
|
3 keypad-activated panic alarms |
|
|
The 6Vdc power adaptor is not required but can be used as an alternative power source (PA6 not included) |
K37
| Main Features* | |
|
|
One high-sensitivity photoelectric smoke sensor |
|
|
Test/Mute button |
|
|
LED operation indicator |
|
|
Battery operated |
|
|
Built-in siren (85dB at 3m) |
|
|
Available in 433MHz or 868Mhz (868Mhz RF not yet certified) |
|
|
ETL/ETLc certification – 433Mhz only |
SD360
© Sabelco 2019
